Product description:

1. The barreled drinking water filling production line is used for 5 gallons (or 3 gallons) barreled drinking water production lines. The whole machine integrates the functions of washing, filling and capping. It is an ideal equipment for the production of mineral water, distilled water and pure water.

2. The computer board CPU of this machine adopts high-performance chips, and the programming method adopts language program solidification with complete functions.

3. The panel adopts OMRON light touch switch, cleaning and disinfecting, filling, time daily output, and the operation is performed by the panel highlight LED digital display or touch screen display.

Ⅰ.Technical Parameters:

1. Bottled water filling line

1. Production capacity: 300 barrels/h

2. Air source pressure: 0.45MPa

3. Pump: 4 stainless steel pumps

4. Motor power: 4KW

5. Number of filling heads: 2

6. Number of capping heads: 2

7. Flushing station: two disinfectant rinses, two backwater rinses, two pure water rinses, one drip

8. Dimensions: 3160×1500×1700 (mm)

9. Air consumption 0.45 cubic meters per minute

Ⅱ. The upper barrel device

1. Production capacity: 300 barrels/h

2. Air source pressure: 0.4MPa

3. Transmission chain plate: 191.5×38.3 (engineering plastics)

4. Motor power: 0.37KW

5. Dimensions: 4000×500×1000 (mm) 5 Air consumption 0.45 cubic meters per minute

Ⅲ. Finished barrel conveyor chain

1. Production capacity: 300 barrels/h

2. Motor power: 0.37KW

3. Transmission chain plate: 191.5×38.3 (stainless steel)

4. Dimensions: 5000×500×150 (mm)

5. Height 200mm

The frame is made of stainless steel

Ⅳ. BS-2 external brushing machine

1. Production capacity: 300 barrels/h

2. Motor power: 1.1KW

3. Brush: 1 set

4. Dimensions: 1000×1000×1250 (mm)

Ⅴ. Capping machine

1. Production capacity: 300 barrels/h

2. Air pressure: 0.5 MPa

3. Dimensions: 600×500×1500 (mm)

4. Air consumption 0.45 cubic meters per minute

Ⅵ. Shrink film machine (electric heating adjustable)

1. Steam design pressure: 0.4MPa

2. Rated working pressure: 0.4MPa

3. Rated evaporation capacity: 3.8kg/h

4. Rated power: 3KW-6KW

5. Power used: 380V

6. Water capacity: 18kg

(2) Overall dimensions of eruption device: 500×350×1200 (mm)

Ⅶ. light inspection (1 set)

1. Detection capacity: 300 barrels/h

2. Power: 90W

3. Dimensions: 800×300×1200 (mm)

Ⅷ. Inner barrel brushing machine (between outer brushing machine and filling machine)

1. Production capacity of 300 barrels/h

2. Air pressure: 0.5 Mpa

3. Motor power: 250W

4. Dimensions: 500×500×2000

5. Air consumption 0.45 cubic meters per minute

Ⅸ. Capping machine

1. Number of gland heads 1

2. Air source pressure 0.6MPa

3. Air consumption 0.45 cubic meters per minute

4. Size: 500*500*1200 (mm)

Ⅹ. Sorting table

Size: ￠1200*200 (mm)

All stainless steel production

Ⅺ. Conveyor chain

Stainless steel chain piece (width 193mm)

200mm high, 2000mm long

All stainless steel production

Note:

1. The height of the empty barrel conveyor line is 600mm, and the height of the finished product conveyor line is 200mm.

2. Air pump requirements: 0.8MPa, gas storage capacity 1 cubic meter

3. Total power consumption 20KW 4 Site requirements (limit): 20m*10m